GT SONIC VGT-6250 2.5 Ltr Ultrasonic Cleaner

The GT Sonic VGT 6250 Ultrasonic Cleaner is a compact device designed for effective cleaning and disinfection.

Ultrasonic cleaning is based on the cavitation effect caused by the vibration of high frequency ultrasonic waves in a liquid. Microscopic bubbles form. They burst, causing cavitation, which creates an intense cleaning of the surface of the object. The bubbles are small enough to penetrate microscopic crevices, cleaning them thoroughly.

Ultrasonic cleaning is extremely effective in removing a variety of contaminants that require tedious manual cleaning. It is used on a relatively wide range of tools and mechanical parts, returning them to near-new condition without damaging particularly delicate parts.

The ultrasonic sterilizer is made in a high-quality case made of white ABS plastic. It has a neat rounded shape, compact and does not take up much space. The equipment weighs 2.5 kg. Lightweight lid with comfortable handles prevents excess debris from entering the disinfectant solution. It has a transparent surface, which makes it possible to follow the process and see the contents. The lid closes tightly.

Rubberized feet add stability to the device and do not scratch the work surface.

There are ventilation holes on the sides that act as a cooling system. On the bottom left is a slot dedicated to the detachable power cord. The cord is long enough – 1.5 meters, which allows you to place the equipment at a convenient distance from the outlet.

• 3 Colours LED Display
• Degas Function for improves cleaning efficiency
• Designed for safety and reliable use
• Built-in heater
• Digital programme, 5 working cycles

• Tank Size: 245 x 147 x 77mm
• Overall Size: 295 x 230 x 207mm
• Tank material: Stainless steel
• Power supply: AC220~240V, 50Hz | AC100 ~ 120V, 60Hz
• Capacity: 2.5 Ltr
• Ultrasonic Power: 65W
• Ultrasonic frequency: 40KHz.
• Heating power: 100W
• Timer setting: 90s → 180s → 280s → 380s → 480s
• New Weight: 2.5 kg
• Gross weight: 2.95 kg

1 x Ultrasonic Cleaner

• Install the sink in a convenient location. She must be stable. Plug the power cord into the appropriate socket (it must be tight). Open the lid and fill the tank with water (disinfectant/cleaner) observing the minimum and maximum volume marks.
• Place the items in the plastic basket. Put it in the tank. Items must be completely submerged in water. Make sure that the fluid level does not exceed the maximum mark.
• Close the lid. Connect the equipment to the mains. Press the ON/OFF button. The digital display will light up.
• Press the TIMER button to set the time. Each repeated press will increase the set time.
• Press the ULTRASONIC button to start working. The indicator on the left will turn green. To stop working, press the button again. The indicator on the left will turn off.
  -If you press the TC button after the time has been selected and only then start the job by pressing the ULTRASONIC, cleaning will not start. Set the time again and press ULTRASONIC.
  – A soft buzzing sound should be heard during operation. It means that the device is working.
• To start the degassing function, press the DEGAS button (intermittent operation of the ultrasonic source to quickly remove air from the liquid). The ultrasonic bath runs for 5 seconds and stops for 2 seconds, the indicator on the left turns green and flashes. This process is repeated. To stop, press DEGAS again.
• Press TC to start the heating function. The blue indicator on the right lights up. Press the button again to stop heating. The indicator will turn off. The maximum heating temperature is 60°C.
  To avoid heating without water caused by incorrect operation, the heater will turn off automatically after 120 seconds. It won’t turn on even if you try to start it.
  Unplug the appliance from the mains for at least 15 minutes. Make sure the tank is filled with water. Connect the appliance to the mains and restart the heating function.
• When the cleaning process is completed, unplug the sink, open the lid and remove the items. Pour out the water so that it does not get on the control panel or power cord. Clean and wipe the reservoir.