FGM Opus Bulk Fill Flow APS

Greater curing depth  – upto 4mm

Low shrinkage stress

Refill

1 syringe with 2g, available in shades A1, A2 and A3.

1. Prepare the cavity and maintain the tooth free from contaminants, preferably with absolute isolation.
2. The application of phosphoric acid and dental adhesive must follow the protocol of the respective products used.
3. Apply Opus Bulk Fill Flow APS into the cavity in 4mm increments. Start by applying the composite to the deeper zones of the preparation, dispensing the material so that the applicator tip is close or briefly above the layer that is being applied. We do not recommend submersing the applicator tip into the composite during insertion.
4. Light cure each increment for 20 seconds.
5. Fill the cavity preparation until there is 2mm or more left to the occlusal surface (cavosurface). This last layer should be restored with conventional composite or Opus Bulk Fill APS (FGM), which allows sculpting and catering to the masticatory mechanical demands. Light cure according to the manufacturer’s recommendations.
6. Check for occlusal contacts, finish and polish the restoration. For finishing, you may use sandpaper disks Diamond Pro (FGM) or burs of fine grit. For polishing, we recommend using felt disks Diamond Flex (FGM) and polishing paste Diamond Excel (FGM).